Made in Sweden for the Nordic climate

läser in

Have you ever been traveling and wished you could take a piece of the beach experience home with you?

Now you can, at least for a small part.

The rounded interior with comfortable seating allows you to both sit and swim around a bit. Build it in a sunken spot in the garden or build a terrace around it and place tables and chairs on the side for the perfect summer party. In winter, several of you can sit in the pool and feel the cold on your face while your body is enveloped by the warm water. A wonderful contrast!

How well you insulate has a major impact on heating costs – We have Sweden’s best insulated terrace pools.

We recommend buying our ready-made insulation packages. The insulation is made of EPS cellular plastic S100. The insulation is 85 mm thick in the walls and the bottom support is also made of cellular plastic, which provides superior insulation on the bath.


Delivery time
Fast delivery! We book the shipping after 5 days.
Made in Sweden in the highest quality
We make our hot tubs ourselves and know that they are climate durable.
 Easy installation
Manuals and assembly films are available to make the assembly easier.
 Spacious with plenty of legroom
You can sit comfortably without freezing your shoulders, deep hot tub with comfortable amount of legroom.
Available to try in our Showroom
All hot tubs are available to “test drive” in Gävle.

  • Plastic insert in hygienic polythene plastic

  • Insulated lid

  • Thermostatic controlled 3 or 6 kw heater from Balboa

  • Filter containers and filter balls

  • Pump and display from Balboa

  • Two meters of hose and connections to the plastic insert

  • Coarse strainer for suction

  • Connections & hose to connect heater, filter and pump

  • Hole saw

Technical specification

  • Room for

    10-12 persons
  • Outer diameter

    240x200 cm
  • Weight

    ca 80 kg
  • Seating height

    41 cm
  • Volume

    2500 L
Execution The insert The plastic is rotationally molded in a durable, maintenance-free and UV-resistant polyethylene plastic. The plastic is virtually indestructible and has an estimated lifespan of more than 40 years. The plastic can withstand heat up to 130 degrees and down to -50 degrees. It is environmentally friendly and fully recyclable. The insert is available in beautiful dark gray with stone effect, the stone effect makes dirt and sea water less visible in the hot tub. The lid The lid is shaped, with a core of heavy insulation to keep the heat in the water even during the cold winters. The lid is reinforced and covered in fine gray vinyl. The lid is foldable in the middle which makes the lid smooth and easy to lift off. The lid has four straps with associated brackets and locks, the locks have a two-digit code lock. The lock and brackets are mounted with the supplied screws. Heater, pump and display Digital display from Balboa where you easily set the bath temperature and cleaning cycles. All connections to mount this are included. A complete package quite simply. With the display, which is mounted in, for example, the trolley, you can easily set the temperature of the water and times for cleaning the pool. Thanks to this, the pump only runs when the water needs to be cleaned or heated, resulting in low operating costs. The pump is 0.33 kw and is adapted in size to our terrace pools. The pump is Balboa's own and is built and adapted to spa pools. Our recommendation is that the technical installation is located next to and at the same level as the bath. If the system needs to be further away from the bath, a larger pump is needed, contact us for more information. Structure Polyethene plastic The plastic is not self-supporting, it needs a support for the floor and seating area. Build your own support using our drawings and assembly videos or buy an insulation package (you do not need to build any support with the insulation package, it gets the support it needs then) Then place the bath on a flat and stable surface that can withstand the weight of the water and the bathers. Choose full insulation to also get insulation for the technical equipment. The insulation It is important to have good insulation to be able to keep a low operating cost, we offer Sweden's best insulation package for our baths. 85mm thick in the walls and made of EPS 100. Installed easily as a large puzzle. Choose full insulation to also get insulation for the technical facility. Insulated technology box  When choosing fully insulated, the insulation comes with an insulated technology box. The measurements for the box are 920x920 mm and 950 mm high.  

Installation of the insulation (accessory)

Installation of the insulated technology box (accessory)

Installing the 3kW system

Install the 6kW system

Final assembly

Installing lighting (accessories)

Installing bubble systems (accessories)

Installing connections

Pacific – Electric heated

Out for delivery within a week


4 220 £



we detected you are at United States, continue ?

Enter your delivery location

Deliver to:

Select your country/region and we will show you the items being sent to you.